At times the Windows 10 Update KB4056892 is unable to install with BSOD inaccuracy 0x800f0845 or roots the PC to crash after its installation and to enter an unbootable condition. Just read this article to find out how to fix the KB4056892 error.

Solution 1 Install the KB4073290 Update

  • As the first step go to Settings -> Update and Security and tap View installed update history.
  • Now press the option of Uninstall updates.
  • Here highlight the KB4056892 update and tap Uninstall.
  • At the end after deleting the KB4056892 update, download and install the KB4073290 update.

Solution 2 Initiate the ‘TrustedInstaller’ before installing the KB4056892 update

  • Here in the Search box write: cmd or command prompt Right-click on the command prompt and choose Run as Administrator.
  • Then in command prompt write the below instruction and click Enter:

SC config trusted installer start=auto

  • As the second last step exit command prompt and reboot your system.
  • At the end after rebooting, go to Settings > Update & Security and check and install all obtainable updates.

Solution 3. Avert the update KB4056892 to be installed

  • Direct to this link: https://support.microsoft.com/en-us/kb/3073930, scroll down and press at Download the “Show or hide updates” troubleshooter package now link and Save the file to your PC.
  • Here initiate the downloaded file, and press Next at the first screen before tapping the option of Hiding updates.
  • Choose the KB4056892 and press Next.
  • As the second last step exit, the “Show Hide updates” utility.
  • At the end continue and install the KB4073290 Cumulative update.

 Solution 4. Fixing Windows 10 with an in-place Upgrade

You can also go for a Windows 10 Repair-Upgrade, by utilizing the Media Creation Tool to make an ISO or a USB Windows 10 installation media.

Solution 5. Inactivate Windows 10 Updates

  • Concurrently tap the Windows R keys to open command box, write services.MSC and click Enter.
  • Here right-click on Windows Update service and choose the option of Properties.
  • At the end arrange the Startup type to Disabled and press OK before rebooting your PC.

Solution 6. Reinstate your System to a Preceding Working Condition

  • As an initial step boot your PC, from the Windows 10 installation media.
  • Now at the Windows Language Setup screen press Next and tap Repair your computer.
  • Then press Troubleshoot –> System Restore. At System Restore (1st) screen press the option of Next.
  • Pick a preceding restore point and then tap Next.
  • Here tap Finish and Yes to authorize your decision so you could restore your system at the chosen date.
  • At this stage wait for some time till the restore course is finished. Throughout the restore procedure, your PC will restart many times and when it’s done, you should enter in Windows without any issue.
  • At the end when you restore your system, continue and install the KB4073290 Cumulative update.

Solution 7.  Delete the KB4056892 using command prompt and DISM tool

  • As the first step boot your PC, from the Windows 10 installation media.
  • Here at the Windows Language Setup screen tap SHIFT + F10 to access the command prompt, or press Next –> Repair your computer –> Troubleshoot –> Advanced Options –> Command Prompt.
  • Now inside the command prompt window, write the below instruction and tap Enter, to see all the obtainable drives on your system:

wmic logical disk get the name

  • By utilizing the “DIR <Drive_Letter>” command, inspect the contents of all recorded drives (except the drive X:), to check which drive has the “Windows” folder. (e.g. “dir C:”)

dir C:

  • Lastly, give this instruction to delete the KB4056892 update:

dism /image:D:\ /Remove-Package /PackageName:Package_for_RollupFix~31bf3856ad364e35~amd64~~16299.192.1.9

  • As the second last step when the operation is finished effectively, exit the command prompt window and reboot your PC routinely.
  • At the end when you login, ensue and install the KB4073290 Cumulative update.

Conclusion

By following all these above methods we hope that you would be able to fix this error without having any trouble.

One of the most frequent sound drivers for managing the sound settings Realtek Audio Driver Windows 10. Realtek High Definition Audio Manager and Realtek Audio driver are available in one package. This essentially the most frequently used sound driver that has unbelievable specialties
It carries a six-channel Digital to Analog Converter (DAC) with 16.20.24-bit Pulse Code Modulation channel audio of 5.1.

Basically, the main purpose of the sound driver is to moderate the sound control play on the windows desktop. Because it provides a high-quality sound to your system through the audio card. It labeled with your audio device to make the sound quality better. A little while back, users have complained about the problems in retrieving the sound driver of Realtek Audio Driver Windows 10. This issue arises presumably either after the Windows update or Windows Upgrade or because of the change in audio card driver.

Today, we will discuss how to fix this problem in Realtek Audio Driver in Windows 10 by following these steps:

Step 1). Confirm it’s a Driver Problem

Step 2). Update Realtek Audio Driver Windows 10

1). Confirm it’s a Driver Problem:

To verify the fact that your Realtek Audio Driver in Windows 10 in your system is causing trouble because of the driver issue, you have to check the driver status in Device Manager:

  •  On your keyboard, press the Windows logo key and R at the same time to invoke a Run command.
  • Type devmgmt.msc and click OK. This will start the Windows 10 Device Manager.

devmgmt.msc

 

  • In Device Manager, increase Sound, video and game controllers. In this category, you shall view the Realtek High Definition Audio. If there is a yellow mark next to the device name ( Commonly an exclamation or a question mark), the problem with the driver, and you supposed to update your Realtek High definition audio. E.g.

Realtek High Definition Audio

2) Update Realtek Audio Driver Windows 10

There are 2 processes through which you can update your audio drivers and fix the problem of Realtek Audio Driver Windows 10 which are given below.

1). Manually/ By hand:

You will have to be proficient in some computer expertise and remain tolerant while your drivers are in the process of updating this way, you need to find exactly the right driver online, download it and install it step by step.

 2). Automatically (Highly Recommended): 

This is the fastest way and the simplest way. All will be done with just a couple of mouse clicks. It is also easy for those who are new to the technology and don’t know how to use it with proficiency.

Case 1:  Download and Install the Driver Manually:

Realtek released its Windows 10 drivers probably a month before Windows 10 was created. If you want to get it, you just need to go to the Realtek website, find the drivers corresponding with your specific flavor of Windows 10 (32 or 64 bit) and download the driver by hand. When you complete the downloaded the best drivers for your system, double-click or right-click to run the downloaded file and follow the on-screen instructions to install the driver.

Case 2: Automatically Update Realtek Audio Drivers:

If you don’t want to update Realtek Audio Drivers manually, as it sounds straining.  You can also do it automatically with Driver Easy. Driver Easy will automatically validate your system and find the right drivers for it. There is no need to know what program your computer is running, you don’t put yourself to risk while downloading and installing the wrong driver, and you don’t need to anxious about making a mistake during installation.

Free and Pro Version of Driver Easy:

You need to update the drivers automatically with either FREE or Pro version of Driver Easy.

1). Download and Install Driver Easy.

2). Run Driver Easy and click Scan Now button. Driver Easy will scan your computer and identify any problem drivers.

3). Click the Update button next to the Realtek driver if you want to download it automatically.  Then install the correct version of this driver (you can do this with the FREE version).

OR click Update All to automatically download and install the correct version of all the drivers that are missing or outdated on your system (this involves the Pro version – you’ll be induced to upgrade when you click Update All.

Conclusion:

Outdated and old versions of drivers are one of the vital reasons for the wastage of user’s time and energy. Keeping in mind the utility of users above were some suggestions through which people can make the most of it and save themselves from tedious and tiring processes of fixing major and minor issues. Windowserrors.org team make sure every solution regarding Windows related errors will be proven, easy and simple to understand for our users.

 

Nvidia Installer failed issue is one of the most often happening problems in Windows 10. Many purchasers have complained about the complications caused by Nvidia Installer to be demoted in the new operating system. Nvidia Installer failed trouble starts from the driver installation problems to many other display complications and are happening because of the clash between the mechanical updating of Windows 10 and Nvidia’s native driver system.

If you are having trouble with the above issues, you can follow below steps to make it work the failed Nvidia Installer processing:

Causes:

When you upgrade the Windows 7 or 8 to Windows 10 then Windows update will try to download and make the installation of GPU drivers in the background.  This process can take time almost near to 5 to 10 minutes. If you try to install Nvidia drivers during that time then you will find Nvidia Installer failed error.

Let’s Fix it:

Windows system waits for at least 15 minutes before making it sure that the background download and installation has completed after you upgrade your system.

Please select “Custom” and check “perform clean installation” (when you see below two screens) while installing the driver.

NVIDIA graphics driver

 

Nivida installer failed

If the issue still doesn’t solve, you can fix NVIDIA Installer failed by keeping in mind these instructions:

Method 1: Update the Nvidia Driver Using Driver Easy

Nvidia Installer failed if you are using unsuited drivers in your system. Before moving towards next steps, all you need to do is to try using Driver Easy to install the driver. It’s only 2 steps ahead.

Driver Easy will automatically recognize your system and will search the suitable drivers for your Windows 10. You should not take chance downloading and installing the harmful driver, and you don’t need to anxious about making mistakes during the process of installation.

i). Download and install Driver Easy.

ii). Run Driver Easy and click Scan Now. Driver Easy will then scan your computer and detect any problem drivers.

Update Nivida Driver

3). Click the Update button next to a flagged Nvidia driver, you would be able to automatically download and install the correct version of this driver (you can do this with the FREE version). Or click Update All to automatically download and install the correct version of all the drivers that are missing or outdated on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

Here take NVIDIA GeForce GTX 1080 for example. Driver Easy will detect the Nvidia graphics card installed on your computer.

Nivida installer failed driver

 

Method 2: Temporarily Turn Off Antivirus / Firewall

Nvidia Installer also failed when antivirus software can block some of your files that’s why the process of installation does not finish properly. One of them is “Comodo” antivirus, many computer users have complained that it makes NVIDIA drivers update fail. The best way to save yourself from this issue is that during installation turn off run antivirus software or opening firewall,  Please make sure their all functions are switched off. You can check and kill all processes in Task Manager.

Note: After installing the driver, remember to re-activate the antivirus software and firewall which could keep your system secure. To do this, follow steps below:

  • Hold down Ctrl+Alt keys and press Delete on your keyboard. Then click Task Manager.

Task Manager

  • In Task Manager, click Processes tab. Find all remaining processes of the antivirus software then kill them on each.
  • Click on the process, then click End task to end the process.

Task Manager detail

 

  • Reboot your PC for the changes to take effect. After that, try installing the NVIDIA driver again. Please select “Custom” and check the box for “perform clean installation” while installing the driver.

Method 3: Remove All NVIDIA Processes and the Related Files

 

  • Go to Task Manager. In the Processes tab, end tasks of any running NVIDIA software.
  • Delete following NVIDIA files if existed (You might be required to log in as administrator to delete the files.)

C:\Windows\System32\DriverStore\FileRepository\nvdsp.inf file
C:\Windows\System32\DriverStore\FileRepository\nv_lh file
C:\Windows\System32\DriverStore\FileRepository\nvoclock file
C:\Program Files\NVIDIA Corporation\
C:\Program Files (x86)\NVIDIA Corporation\

  • Reset the PC then install the driver again. Please select “Custom” and check “perform clean installation” (when you see below two screens) while installing the driver.

NVIDIA graphics driver

 

Nivida installer failed

 

Method 4: Reinstall the Windows

The last solution is to download Windows and reinstall windows or Upgrade Windows 7, 8 or 10.

Note: The process of the reinstallation of Windows will erase-remove all files, documents and the software stored in the drive where the system is installed on. To save your data from deletion back up all important files and documents. After reinstalling the system, try to install the driver again.

 

Conclusion:  Selection of secure drivers is one of the most paramount steps through which people can save themselves from many issues in future. NVIDIA Installer failed because of the above-mentioned reasons. By following certain solutions, you can make your system secure and make it run in a better way.

 

The University of Athens Speech and Accessibility Laboratory has made an online directory where people who are the handicap can download accessibility software programs to make their PC more friendly and helpful for their convenience. The lab has installed and tested over 160 applications, including free voice to text and speech software.

The disability software can be classified into 5 technology categories:

  • Blindness
  • Motor Disability
  • Low Vision
  • Hearing
  • Speech Disability

Each entry adds the developer name, version number, a summarization, system essentialities, information about the installation, settings, and downloads (including internal and external links), and a screenshot.
The site provides three ways to search for applications: by assistive technology category, type of disability, or by alphabetical listing.

Following are profiles of some accessibility software programs.

Applications for Deaf & Hard of Hearing Pupils

ooVoo:

ooVoo accessibility software program is an online communications platform that helps text chatting, video calls, and standard public network telephone calls with a prepaid account. Consumers can also record and send video files and connect with non-ooVoo users via Internet Explorer. User registration is needed.

Applications for Learning Handicapped Students

MathPlayer:

One of the most helping accessibility software programs is MathPlayer that enriches Internet Explorer for a better result of mathematical notation. Math displayed on web pages is written in Mathematical Markup Language (MathML). While using Internet Explorer, MathPlayer changes MathML content into standard math notation, such as one would find in a textbook. MathPlayer qualify users to copy and expand equations or hear them read in a large voice via text-to-speech. The application needs Internet Explorer 6.0 or above.

Ultra HAL Text-to-Speech Reader:

The Ultra Hal Text-to-Speech Reader reads documents in a loud voice. Users can from a variety of reading voices. The screen reader permits users to write, copy and open text files. Press “Read All” to hear complete documents read aloud. Those who are suffering from low vision can also read along. The application can also read what’s copied to the clipboard and save the text as a WAV file, and read all Windows menus and dialog boxes.

Apps for Blind and Partial Blind Students

NVDA Installer:

The Non-Visual Desktop Access (NVDA) is an out of cost, open-source Windows-based screen reader made to bring computer access able to blind and partially blind users. NVDA’s built-in speech synthesizer allows users to communicate with all Windows operating system units. The main applications of NVDA support including Internet Explorer, Mozilla Firefox, Outlook Express, and Microsoft Calculator, Word, and Excel. A manageable version of NVDA is also feasible.

Related Article: Nvidia Installer Cannot Continue

Multimedia Calculator.Net:

The Multimedia Calculator demonstrates an onscreen calculator that allows users to select what function buttons will be shown. The numbers display in a contrasting color from the function keys to make the resolution better. The calculator has a 21-digit display. Settings permit users to hear each keystroke spoken audibly and to reverse the number layout.

Pointing Magnifier:

The Pointing Magnifier is a mouse-activated magnifying glass that amplifies a circular area on the computer monitor. The user first moves a virtual lens with the mouse over the area they wish to enlarge. Then they put the cursor within the circle and click any mouse button. Everything inside the circle is enlarg; the cursor is pinned in place. Any mouse action a user then takes within the magnified circle returns the Pointing Magnifier to its actual size.

Apps for Mobility Infirmed Students

Angle Mouse:

The Angle Mouse upgrades the productivity and mollifies of Windows mouse pointing for people with impaired motor skills. This app runs in the background. The Angle Mouse is “target-agnostic:” it constantly modifies the control-display (C-D) gain based on mouse movement. When the mouse moves straight, it moves immediately but when the mouse corrects abruptly, often near targets, it slows down, making targets easier to reach.

Tazti Speech Recognition Software:

Tanzi speech recognition software permits users to run applications and browse the web using voice instructions. Tanzi makes a voice profile for each user, enabling synchronic use by multiple people. Training the program by reading texts intensifies efficiency. Users cannot switch Tanzi’s default directions, but can produce additional ones and monitor their performance.

ITHICA:

The ITHACA framework allows software developers and integrators to build computer-based augmentative and alternative communication (AAC) aids. ITHICA elements comprise word and symbol selection sets, message editors, a syntactic parser, scanning functionality, and a figurative language translation database.

Eldy – make Computer Interface Simple:

Eldy is aimed at people who are more than over 60 or who is the newbie to computer operations. It gives large, clear controls to permit writing of documents and email, sharing pictures and browsing the web. It may be of use to a partially sighted person involved in basic computer use. Now It is available for Windows, Mac and Linux computers, and some Android tablets. It has clear and easy instructions and video tutorials to help you get start.

 

Lightning Express:

One of the restrictions of Windows Magnifier is that it has no full-screen mode before Windows 7, and only in Windows 8 does it work with all color settings. The plus point of Lightning Express is that it provides full-screen magnification. It works with 32-bit versions of Windows XP, Vista and 7, and with desktop applications in Windows 8. A noteworthy flaw of Lightning Express is that it has to be downloaded or run from the Internet each day.

Final Words:

Accessibility software programs are very helpful for those who are new to operating technological stuff and handicapped people. They are friendly user programs through which people can learn and understand various things easily and enhance their capability.

 

Users have faced the issue of IDT high definition audio codec driver Windows 10 while downloading via Device Manager or Windows Update. The main reason behind it is when users are about to upgrade their Windows 10.

Following is the main issue that can be the reason of your trouble:
In the processing of installation Windows 10 faces this issue when they find driver software for your system.

Definition of IDT High Audio CODEC:

It is a device that is interlinked to the PC is unable to work normally.

IDT High Definition Audio CODEC Driver

 

In case users face this issue in the process of the installation of IDT High Definition Audio CODEC driver, just go for the methods in the article below to solve it and download drivers properly.

Method 1: Uninstall Current Driver and Reinstall Latest Driver

  • As first step extract category in Device Manager named “Sound, video and game controllers”.
  • After doing that right-click on IDT High Definition Audio CODEC and tap Update Driver Software on the context menu.

Update Latest Software

  • Press on the option of Browse my computer for driver software.

Computer driver software

 

  • Tap the option of Let me pick up a list of device drivers on my computer.

software on your computer

 

  • After the completion of the above steps choose High Definition Audio Device (Not IDT High Definition Audio CODEC) and press Next button. You will see a warning message, just tap Yes button and you will see that the driver will be downloaded properly.

High Definition Audio Device

  • Hopefully, this procedure will sort your problem out, in case it doesn’t then just go for the next procedure.

Method 2: Update Drivers Via Utilizing Driver Easy

Here you can fix your issue by utilizing Driver Easy via automatic processing. The main purpose of Driver Easy is to find out the right drivers for your PC. There is no need to be worried about installing incorrect drivers and cause trouble for your system in the long run because Driver Easy will do this task without bothering you or causing any trouble for you.

With the help of FREE or the Pro version of Driver Easy, users can do it automatically. But with the Pro version, it will only take a few seconds.

  • As the first step download and install Driver Easy.
  • Then run Driver Easy and tap Scan Now button. You will see that Driver Easy will scan your PC and find all problematic drivers.
  • Tap the Update button next to the IDT high definition audio driver to install via automatic processing the right version of this driver. Users can also tap Update All to download the correct version of all the drivers automatically that are old and misplaced on your PC.

IDT High Definition Audio CODEC

IDT high definition audio codec driver windows 10 can be solved if users are able to find well-suited drivers for their system. We hope that the above methods will help you resolve this error.

After downloading Windows 10, in case you’re currently utilizing an AMD graphics card, you will probably face some issues like AMD Drivers Won’t Install Windows 10 Error. There are some users who have complained that when they try to download their AMD drivers. The process of installation doesn’t end because of some detection driver issue.

The good this is that it is easy to fix the AMD drivers Windows 10 in Windows 10 as well as in Windows 8 and 8.1. The issue shows when you’re interconnected to the internet while downloading Windows 10. As the setup wizard downloads Microsoft AMD drivers via automatic processing. Which can also be the troubling reasons of AMD’s drivers. Like after the detection part, users will see that their screen will turn black and now you are supposed to reboot your PC. OR in some other cases, you’ll see a “Detection Driver” problem.

Following are some methods through which you can fix this issue:

Uninstall Current and Reinstall AMD Catalyst Drivers:

To be able to install the AMD Catalyst drivers, you must first uninstall the drivers Microsoft firstly installed, while setting up your system. You can uninstall your drivers easily with AMD Catalyst Uninstall Utility, and here’s how you can do that:

  • As the first step open Control Panel.
  • Then tap on the option of Programs And Features.
  • Now choose AMD Catalyst Install Manager.
  • Click on
  • After the completion of above steps, if prompted by the AMD Catalyst Install Manager just InstallShield Wizard and choose Express Uninstall software of ALL ATI.
  • Tap OK to permit the AMD Catalyst Install Manager. Then in InstallShield Wizard, you can also delete ALL AMD driver and application parts.
  • At the end press Yes when prompted to reboot your PC and end the process of uninstalling the previous driver.

When the utility finishes uninstalling all the AMD drivers, your screen should look as if it had a standard VGA driver installed.

When the process is finished all your default drivers will be uninstalled and your screen will look like you have a standard VGA driver installed. Sometimes users don’t have any AMD drivers installed on your computer, restart the AMD Catalyst setup and you should install your AMD Catalyst drivers normally.

Now, in case users know how they can download AMD drivers again, following are some methods to do it properly:

Installation of New Driver Utilizing AMD Radeon Settings:

One of the simplest methods to resolve AMD drivers windows 10 is to update your AMD drivers by utilizing official AMD’s support software, AMD Radeon Settings. There are higher possibilities that you have this software already in your PC in the condition that your last driver was downloaded through DVD.

AMD Radeon Settings

Users can just open AMD Radeon Settings, in case a new update is there, the program will send you a notification. You just have to download all those updates that are there and reboot your PC and you will see everything will be sorted out.

Installation of New Driver on your Own:

In case AMD Radeon Settings will not pop up with a new update or you don’t like utilizing this software then there is another option to install drivers on your own. Users can do it by visiting official AMD Driver Support site, selecting your graphics card, and then go through the process of drivers’ installation. Download drivers the way you do other programs. You just need to follow the wizard guideline and reboot your PC.

Installation of New Driver via Device Manager:

Device Manager is the most convenient way in case you want to install drivers and resolve AMD drivers windows 10. Sometimes users don’t know how to install drivers utilizing the Device Manager, so in this case, you can just follow the below steps:

  • In the first step go to Search, write ” devicemngr “, and open Device Manager
  • Then extract Display adapters.
  • Now right-click your AMD graphics card, and go to the option of Update driver.

Device Manager

 

  • After the completion of the above steps just follow the next steps that are on-screen.
  • In the end, you need to restart your system.

Installation New Driver via Tweakbit :

In case you are a newbie and don’t know how to update the drivers on your own, here we will recommend you to do it via automatic processing through Tweakbit’s Driver Updater tool. As this tool accepted by Microsoft and Norton Antivirus and after experimentation experts have declared that this is one of the best automatic methods of solving your issue.

Users can find how to do it in the following steps:

  •  Firstly, You need to download the TweakBit Driver Updater.

TweakBit Driver Updater

  • After downloading it the program will start scanning your system for old drivers via automatic processing. Driver Updater will find your downloaded driver versions with compare to its cloud database of the newest versions and will send you right updates. Here, you will have to wait for some time so the process of scanning ends.
  • The time the process of scanning ends. You would be able to see a report on all problematic drivers that are currently available in your system. Just go through from the list and see in case you want to update each driver one by one or all together. If you want to update a single driver at a time, tap the ‘Update driver’ link next to the name of the driver. You can also do it by tapping the ‘Update all’ button at the bottom to download all suggested updates via automatic processing.

Note: There are a few drivers that will be downloaded in more than one steps so you have to tap the ‘Update’ button multiple times to download it properly.

Disclaimer:
There are a few functions of this tool that are not free of cost.

There are a few plus points of this tool. As we all know that it doesn’t only support AMD drivers. Users can utilize it to update any kind of driver on their system. If you’re looking for a lifelong way that will expose issues caused by old drivers, Tweakbit is the best solution.

Switching Off Antivirus and Firewall:

Here users can also try temporarily disabling their antivirus and Windows Firewall and solve AMD drivers windows 10. Antivirus programs are famous for not being very supportive with Windows updates. And you will see that driver updates are also not working in your case. In this condition, it’s not possible to download the latest update for your AMD graphics card. So you can hide your antivirus for time being. You can also go hiding Windows Firewall as well on the temporary basis.

Following is the way to do it:

  • As the first step tap Windows Key + S, write Firewall and choose Windows Firewall from the list of results.
  • Now when the Windows Firewall starts, press on Turn Windows Firewall on or off.

Windows Firewall on or off

 

  • After the completion of the above steps choose to Turn off Windows Firewall for the sake of changing in both private and public network settings.
  • At the end tap OK to save changes.

We hope that any of the above methods will help users in resolving AMD drivers Won’t Install Windows 10 Error.

How to Rollback Nvidia Drivers Windows 10 is an issue that needs some attention. NVIDIA graphics cards users often face issues which demand them at the point to return to former installation. We will explain how to Rollback Nvidia Drivers Windows 10 to avoid any problems you are facing with the present driver. There are mainly two ways to roll back NVIDIA drivers- using the Display Driver Utility (DDU) and fetching previous builds from the NVIDIA website, and eventually rolling back with the Windows Device Manager.

Any of the two methods below will get you back to the last working version of your graphics driver.

1. Using the Display Driver Utility

  • Download the last working version of your NVIDIA driver for your system. Search for your graphics card drivers under the Option 1: Manually find drivers. You have to give your graphics card type, OS, and other required information and then click the Search You’ll be provided with a list of drivers and their versions, choose the most suitable version for your rollback and download it.
  • Remove all current and old NVIDIA Graphics drivers and related software using the Display Driver Uninstall Utility (DDU). It’s suggested to perform this action in the safe mode.

Display Driver Uninstaller

  • Install the drivers you downloaded from the first step. Do this by launching the executable, and while installing, select Custom (Advanced) and select Perform a clean installation. This will further wipe previous installations and then install the latest working version.

Nvidia Graphics Driver

 

  • Restart your PC to finish the installation and then try executing the previous actions from which you faced problems.

2. Using the Device Management Console

You can also use the Windows inbuilt utility to rollback faulty drivers by following these steps.

Note: If the issue is with your computer or a laptop/notebook you should try using the Reimage Plus Software which can scan the repositories and replace corrupt and missing files. This works in most cases, where the issue is originated due to a system corruption.

Press the Windows + R keys, type devmgmt.msc. This opens up the Device Management Console In Windows 8 and above, press the Windows + X keys and select Device Manager.

devmgmt picture

  • In the Device Manager, expand the Display adapters, right-click on your NVIDIA Adapter under this category and click Properties and then click the Driver tab.

Nividia Driver properties

  • In the Driver tab, click Roll Back Driver.

Roll Back Driver

  • If the confirmation dialog comes up, click Yes to confirm the rollback. After this process is done, restart your computer to fully effect the changes.

Driver Package Rollback

  • Now try performing the previous actions from which you encountered issues to confirm if the rollback indeed worked.

Note: If the problem is with your computer or a laptop/notebook you should try using the Reimage Plus Software which can scan the repositories and replace corrupt and missing files. This works in most cases, where the issue started due to a system corruption.

Sometimes drivers stop working normally for your Windows 10 and you have to know how to rollback Nvidia drivers windows 10, so your system works properly without any further drivers issue. By following the above-given methods you can make your system work again.

In case you find the issue “Display Driver Stopped Responding”, your system most probably starts hanging for the certain duration and will not work. You should not be panicked because of it. There are a lot of users who are facing trouble because of this issue.

Causes:

It happens when the Timeout Detection and Recovery (TDR) feature detects that the Graphics card isn’t working within the specified time, and the display driver is restarted to avert the necessity to continue. The factors below are the main reasons of Display Driver Stopped Responding on windows 7, 8, 8.1 and Windows 10:

  • The trouble with display drivers
  • Overheating or warming of GPU (Graphics Processing Unit)
  • A lot of continued programs or particular application
  • The issue of GPU timeout (the most known cause)

By following the given methods, you can fix the issue of Display Driver Stopped Responding on Windows 10.

1. Update Graphics Driver:

At times, Display Driver Stopped Responding issues ends when you update graphics or display card driver to the latest and most modified and updated version. This should be one of the most authentic methods to be applied by the user to solve the trouble. It is also the easiest way to solve Display Driver stopped responding on windows 10 issue.

You can use Driver DR, download and install the driver that is best for your PC. Manufacturers such as Intel, NVIDIA, AMD, and many others can all be found in our well-founded database.

You can Download the driver to click here

When your download ends you will follow the given instructions all as explained. After that, you will double-click it to run it on your system.

Here we will explain how you can utilize Driver DR to support you with the download and install of the needed driver in details.

  • Press “Scan Now” button. After that, you will wait for a couple of minutes before the procedure of scanning ends.

Driver DR

  • This is how it would look like after the scan.Driver DR Settings
  • Press “Get Drivers” button to select the drivers you need to update.
    You could select to download the drivers one after another or download all the drivers all at once to save your time by pressing “Download All”.

Driver DR Pic

  • Press the “Install” button after the download is completed. Then you will leave it to Driver DR, that will support you with the next steps of installation.

Driver DR download

 

2. Using Task Manager to Close Program

Display Driver Stopped Responding can be solved sometimes if you open “Task Manager” to close a particular program that works in the background, programs like video program or gaming procedure. It will further support to unloose the pressure on your GPU. After that, you can start “Task Manager” by pressing the taskbar button and then right-click “Start Task Manager.”

3. TDR Value Data Increasing

The way we have explained before, the default setting of the response time of Recovery and Timeout Detection could be one of the biggest symptom that is causing conflict in the Display Driver Stopped Responding. The default setting is just 2 seconds, if you set it more than 2, the problem will be resolved.

  • Adjacent all the programs that are based on Windows.
  • Unlock Registry Editor.
  • Here is how you can do the process:
  • Write “regedit” in the search box and then click “Enter” and select “Yes”.

regedit Run command

  • HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > GraphicsDrivers
    to enter GraphicDriver Settings.
  • Search for the “TdrDelay” file on the bottom. Right-click it, select the third option to remove it.Note: If you “TdrDelay” file not available or exist then follow the below steps to create the new one. 

Display drivers stopped responding

 

Display Driver stopped responding

  • Right click on the blank space and select “New”. Then select the right option according to your operating system (32-bit or 64-bit) and change the file name as “TdrDelay”.
  • For 32 bit Operating system.

32 Bit Tdr

 

  • Right click “TdrDelay” and select “Modify” to press Edit Value Interface.

TDR delay

  • Write in a number above 2, say 8, and then set the new made file default value as Zero.

64 bit Operating system

Now can see it on your own, this is way more complicated then you ever think and might even be the reason for some unwanted problem.

4. System Package Updating

Display Driver Stopped Responding issue will end sometimes when you will update your operating system. It’s up to you, you can do it by using the automatic update of Microsoft which is supported by a third party program or you can also find the drivers on the official websites easily.

5. Reset the GPU Frequency

In case your GPU is revved up, it is suggested by the users that you set it to below standard or the same as standard. There are many GPU overclocking utilities, such as Gainward Expertool, AMD OverDrive, Asus GPU Tweak, Sapphire Trixx, EVGA Precision, King tool MSI Afterburner and Zotac Firestorm.

MSI Afterburner is the most well-known GPU overclocking utility all over the whole world. It helps probably all the latest and updated version of NVIDIA and AMD graphic card. Customers can also repose the checklist of things such as the speed of the fan, shader clock, core GPU clock’s etc.

Download MSI Afterburner from here: 

http://event.msi.com/vga/afterburner/download.htm

By following the installation instructions, you can install this program on your system.
Click twice to run it, after that you will see an interface like this.
Five things are necessary that you need to repose. And for reset the GPU frequency,
You can also reset the Core Clock database, reduce this database or keep it as default.

6. Update Motherboard/Bios Drivers

If your problem still remains after the update of your graphics drivers, you can try to update the motherboard drivers, almost all the hardware is associated to the motherboard (which applies most to old computers). Hence you need to check if the drivers for the motherboard are old if yes, please find out the latest versions and update them.

7. Cooling Computer

By putting your hand on your system, in case it is too hot, you can switch it off and wait for some time to cool it down on a normal temperature after that you can switch it on again. In case you are using a laptop, you can also use the radiator to support your computer to be cool down when you are enjoying yourself while playing games or entertaining yourself in some other ways.

Another option for you to do it is to remove the dust off from your graphics card and PC. In case you are using a desktop, just open the main box to check and clean the fan that is inside the system. Those who use laptops, a radiator is created beforehand that is necessary because there are many manufacturers that need different methods of cleaning according to their choice and convenience.

8. Change Graphic Card

It is important to change your graphics card when it’s necessary. Situations like when the graphics card is too old to be compatible with new and modified version of games or to process a lot of images at a time, you have to think about changing it and buy a new one. It would be better for Display Driver Stopped Responding on Windows 10 and other versions of Windows. Because the problem is that the old graphics cards will not support the new versions of games as games are updated in a faster speed that’s why you need higher configuration graphic support.

9. Close Some Programs Running in the Background

Too many programs running at the same time can also slow down the speed of your system and that’s why Display Driver Stopped Responding. Try to end the programs and apps that you are not using or that are unnecessary for you at a specific time. In case the problem occurs only when you are using a specific application, it may have known issues or corrupt files. Finish this application and see if the problem finishes.

10. Check If There is Failing Hardware

Failing Hardware (motherboard and/or memory, processor, graphics card,) is also a cause of the defect in your system. You can test the hardware in another system to check in case the problem is because of the hardware. On the contrary, you can also contact the memory or motherboard manufacturer for better comprehensive troubleshooting directions.

11. Reinstallation of Windows

Sometimes, your windows operation system contains some corrupt or registry files which cause display driver stopped responding error. So, the Best way to reinstall the Windows because, in this way, you can clean the operation system’s corrupt files or registry.

Note: Before the start, the clean reinstallation of Windows, must take backup of all your important data because, during the reinstallation of Windows, system data of desktop and C drive will be deleted.

Now if your system starts hanging, no need to be worried. Try all of the above methods one after another if you are unable to fix Display Driver Stopped Responding on all version of Windows. We recommend you to try any of the above methods and fix your system’s error.

Driver updater software supports its users to update device drivers downloaded in Windows for the hardware of your PC, as it depends on you that which drivers you want to download. They are important because they make your system’s drivers updated with the latest drivers. While using it there is no need to be anxious about the functioning of Device Manager, nor will you go and look for the correct driver for your system.

Important Note: There is no need to utilize free driver updater software to update drivers in your system, as from the name mentioned that they are free. These programs are for the user’s benefit.

Following are the ways through which users can Update Drivers in their PC’s Windows:

1. Driver Booster

It is one of the finest ways to update driver in your system. As it is appropriate with all models of Windows and solve the issue of updating drivers easily. The best thing about it is that it can easily find out old drivers through automatic processing. As the new updates are launched, users can start installing them from the Driver Booster software so they don’t have to look for an internet site.

As you are about to download a driver, you can see the difference in how the updated driver version varies from the presently downloaded driver. It would be supportive in the longer run. It also makes a recovery point before downloading a driver in case something happens during the downloading process.

In settings, there is an opportunity to download drivers in the backdrop, which will conceal the downloading process and information that might be visible on the screen. This is easy as users don’t have to go and tap via a lot of windows while installation of updated drivers. Driver Booster is workable for Windows7, 8, 10, XP and Vista.

Driver Booster

2. Free Driver Scout

It is an outstanding driver updater as it gives its users genuine processing of automatic updating. This also means that the program will scan all those updates you need through automatic processing, will install and download the updates, as it will not demand any effort from users side, which can’t be required for any other available program in this checklist.

Device drivers can be omitted via scanning with Free Driver Scout so, in the long run, they will not ask for any other update. Another tremendous characteristic of Free Driver Scout is the capability to redeem drivers. The program will allow you to recover those drivers you want and then simple rescue them again in case you want them.

There is a very supporting software available in Free Driver Scout named as OS Migration Tool. Users can start it in case you’re up to download a diverse Windows operating system to your system. It will also search the device drivers for the updated OS and secure them for the sake of custom location, like USB. After that you have the other Windows operating system downloaded, you can also utilize that software to revive those OS-specific drivers so there is no need to be panicked about searching the device drivers.

Important Note: There is no doubt about it that Free Driver Scout is a very friendly using program, as it didn’t search a lot of old drivers as Driver Booster gives, that is why we will recommend it in our checklist. It can easily work in Windows 7, 8 and 10.

Free Driver Scout

 

3. Driver Pack Solution

An alliance that’s simple to utilize than many others on this checklist. The best part about it is that it has fewer buttons that’s why there are no complicated screens or other options for users to select. It also helps in downloading and automatic installations so that users don’t have to check the installation process.

As you start DriverPack Solution, you can also select how to install and download all drivers via automatic way or on your own, you can select the way according to your choice and the drivers you want.

In DriverPack Solution there is also a guideline for users, as a software updater that can download some suggested programs to your system. It works in Windows 7, 8, 10, XP and Vista.

Driver Pack Solution

4. Snappy Driver Installer

Snappy Driver Installer is a free driver updater software and it’s similar to DriverPack Solution, we just mentioned before. Users can install more than one drivers of it altogether for a lot of various classifications of devices. As you have installed them, the program provides you urgent entry to download the updates, with or without the access of an internet.

Snappy Driver Installer is very simple to utilize and it will not bother you to download it first to move and build in the installed drivers to any other system.

It has no commercials, will not restrict your downloading range, and can download as many drivers as you want without any restrictions.

It will support both 32-bit and 64-bit models of Windows XP, 7, 8 10, Vista.

Snappy Driver Installer

5. Driver Talent

Driver Talent’s old name was DriveTheLife. It is simple for users to utilize the driver updater program that allows you to install device drivers via program so there is no need to find an internet connection for official installation channels. It will not only update old and misplaced drivers but will also resolve those that have the virus in it, it will also revive all your downloaded drivers for your convenience.

The launch date, its size, and version number are shown for you as you are up to install it so you can be confident that what you’re doing.

There is also a substitute version obtainable that adds network drivers and performs its duty offline, as it sounds best in case you have to download drivers and don’t have the right network driver downloaded.

There is also a facility in Driver Talent that allows you to install all the required drivers for the PC before so that you can install them again should you download the OS again some other time.

During the utilization of Driver Talent, people have seen the program is downloading itself on my computer within a few seconds, most of the driver updates installed very early, and it is also very good.

Users can download Driver Talent can in Windows XP, 7, 8, 10 and Vista.

Driver Talent

 

6. DriverMax

This is an out of cost program for Windows that can update old drivers. The thing about it is that it is bounded and has access to limited places. DriverMax can revive a few or all of the presently downloaded drivers when we talk about updating the old driver. It also revives roll back drivers, old drivers, and recognizes that hardware that is anonymous. DriverMax has searched a big amount of old drivers than all programs from this checklist did.

Important Note: DriverMax will also install dual drivers every day and 10 drivers every month, and will only install a single driver in a specific time. Users can also go for old drivers but as you are restricted to the amount of how many you can install. It is workable for Windows7, 8, 10, Vista, and XP.

DriverMax

 

7. DriversCloud

The old name of DriversCloud was Ma-Config as is a web that doesn’t cost anything that searches comprehensive data regarding your hardware and software, like old drivers. It will support its users by installing a program that permits a web browser to collect data from your PC. Users are able to search the groups like My Drivers, Autorun, BSOD Analysis, Network Configuration, and numerous other places users can check with the help of webpage.

When you want to update a driver, you can check the comprehensive information about the latest driver details. And it compare them with the presently downloaded driver. Users can also check the operators, INF file name and date, version number, and hardware Identity. Users who have Windows 7, 8, 10, XP, Vista and Windows 2000 can download it.

DriversCloud

8. DriverIdentifier

DriverIdentifier is the easiest updater tool, as it is a very helpful free driver updater program.

Users can scan drivers if they do not have internet, in case your network card driver isn’t responding. As the scanning process ends, DriverIdentifier will secure the checklist of drivers to an HTML file.

Users can just open the file on a PC that has the internet connection so the DriverIdentifier webpage can match the conclusions through their databases. Drivers that require updating will have an Update connection close. An accessible version of DriverIdentifier is also there for people.

Note: Users can make a free account at DriverIdentifier to install updates about the driver. It will support Windows 10, 8, 7, Vista, and XP drivers.

DriverIdentifier
9. Driver Easy

Driver Easy is a program that utilized to search for updates for drivers in Windows, as it’s free for both public and business usage.

Users can make a timetable for the scan with Driver Easy to see for old drivers. And It allow you to install an update immediately. This timetable can be managed on the day-to-day, weekly, monthly basis. When your system is free, or any time you log on to Windows.

The best thing about Driver Easy is that you can install drivers from within the software. It is not necessary to have an outer web browser.

Some extra characteristics added in Driver Easy. It including checking hardware information and scanning for the sake of driver updates in case you don’t have access to the internet.

Important Note: The range at which users permitted to install updates via Driver Easy. Which is way too very low, lesser than the other programs in this articles mentioned above.

Driver Easy

10. Device Doctor

It is very simple to utilize driver updater program. Users can install it as an unchanging program or as a moveable one that doesn’t need downloading. Like the above tool, it also scans to see old drivers. Then when it got an update you’ll be taken to a webpage to install it on your own.

As you have to install updates outside from Device Doctor. At times you have to unzip driver files before utilizing them. You can also do it with a file unzip software. Like the one added in Windows or via third-party tool including 7-Zip. It restricted to install a single driver daily. It created to search drivers for Windows XP and Windows 10.

Device Doctor

Driver updater tools are the best tools to make your system run properly, without any issue. It saves your PC drivers and makes it work smoothly without any error.

There are many reasons for Driver Power State Failure but power setting errors are one of the foremost reasons for Driver Power State. There is no need to be panicked about it because in the following articles we have some methods to resolve your issue:

Note: You must be logged into Windows before start these solutions. If you can not log into Windows then simply restart your computer in Safe Mode and then try these 3 solutions.

1. Power Saving Should be Turn off to Resolve Driver Power State Failure

As we have mentioned above the main reasons for this issue is the power setting. Users should probably alter the power settings to see if it fixes the Driver Power State Failure error.

  • Tap the Win+R (Windows logo key + R key) on your system’s keyboard together to invoke the Run box.
  • Now write control panel and to open the Control Panel Window tap OK.

Control Panel

  • Then see Small icons and choose Power Options.

Power Options

  • Make sure that Balanced has chosen, and tap Change plan settings next to it.

Power options pic 1

  • Now tap Change advanced power settings.

Power options Settings

  • After the completion of the above steps Extract Wireless Adapter Settings and Power Saving Mode, then you can change the Setting to Maximum Performance.

Power options Setting pic 1

  • Now you can Extract PCI Express and Link State Power Management, after that you can also change the Setting to Maximum power savings.

Power Options Settings pic 2

  • Then Press Apply then OK.
  • Now you can restart your PC to see in case the Driver Power State Failure error has ended. In can also be a possibility that this method doesn’t resolve your problem, and then you can try other methods.

2. Uninstallation of corrupted Drivers to solved Driver Power State Failure

Drivers that are problematic and have the virus are also the reasons for this issue. Users can also see the driver status in Device Manager. In case users are unable to see a yellow sign next to a device, remove that device. That yellow sign next to the device highlights if the device driver is misplaced or has the virus.

Note: If Users can go to 3rd Solutions if Device manager doesn’t have a yellow sign.

  • Tap the Windows logo key  and R together on the keyboard to start the Run
  • Now Write devmgmt.msc and tap OK.

devmgmt.msc pic

  • Now you can Extract the category and search the device with a yellow sign.
  • Then Right click on the device.
  • Press for uninstall option.
  • Redo above process to remove all drivers that have a yellow sign.
  • As the last step, restart your system to see Driver Power State Failure error has ended.

3. Updating the Drivers

You can also update your PC drivers to get rid of Driver Power State Failure Windows 10 error,
in case none of the above procedures worked out. With the help of Driver updater, users can update drivers via automatic processing if they don’t have much time and energy to do it, as it will find your PC and suitable drivers for your system without causing any harm to your system and bothering you.

By updating drivers via automatic processing you can do it with the FREE or the Pro version of Driver Updater. There are different free and pro driver updater available. You just need to download any one of them.

  • Install Driver Updater.
  • Now Run Driver Updater and tap Scan Now. Driver Updater will scan your PC and find all corrupted drivers.
  • Now tap the Update button next to all flagged devices to download the well-suited version of their drivers by automatic processing. Users can also do this with the FREE version. You can also tap Update All to install the right version of all the drivers that are misplaced or old on your system automatically.

Driver Power State Failure Windows 10 error is one of the most frequently happening issues to user’s system that most of the time disturbs people. By following the above methods you can follow and fixed this Driver Power State Failure error.

System Restore Point:

System Restore is an integral attribute that is present in Windows 7 that helps to improve the condition of your PC, that includes Windows Registry, files in your PC, local user profiles, and settings of your system. When you are having trouble with your PC, you should know how to create a restore point windows 7to retrieve system in its old state.

There are many unpredicted things that can be the cause of damage to your system including accidental deletion of system files, Virus attacks, Ransomware, etc. That’s why it is important to make a system restore points in Windows 7. It was first launched in Windows ME and was included in all the Windows operating systems that came after that.

How to authorize and Produce System Restore Points in Windows 7?

When your new software is in the process of installation windows will generate system restore points automatically, when new Windows updates installed, and a driver is installed. If nothing like that is mentioned above happened in seven days, Windows 7 will make a system restore point in an automatic way. Except that, you can also build a system restore point on your own. By following the steps below you can make it sure if System Restore is allowed and custom the settings.

system properties
  • Right-click on to run “My Computer” and then go to “Properties”. In the PC Properties window, press on the “System Protection”. You can also search for “system protection”, and choose “Create a restore point” from the results.
  • In Windows 7, C: drive protection is on by default. If you find it necessary to make restore points on other drives also, you turn the protection on for the specified disk. By the way, the System Restore protection is damaged by default in Windows 10.
  • Presson Configure to configure restores settings. After that, you can specify what do you want to save and disk space used for system restore points.
system protection for recoery partition
  • Then System Properties dialog screen automatically opens up and press on “Create”.
  • As the procedure is finished, you would be able to see the message that restores point was created successfully.

The restore points will be saved on the volume that you are protecting, in case the volume is corrupted, the restore points will not work. If the disk free space on the volume is too low for System Restore to work, it will automatically disable itself.  

To erase the previous restore points you can also use Disk Cleanup, but the installation of the latest one will save some disk space.

What is Custom System Restore Point Creation Frequency?

You can utilize Windows Task Scheduler to automatically make a system restore points on a scheduled time or even if you are you are not satisfied with the gap between restore points creation interval. Like to produce system points at startup:

  • Write “taskschd.msc” in Windows Run prompt open Task Scheduler to make a basic task.
  • On the left panel, navigate to Task Scheduler Library -> Microsoft -> Windows ->SystemRestore.
  • Click twice on the task named “SR” to edit it.
  • Under Triggers tab, add a new trigger at Startup After doing that you can also add triggers as you want. Press “OK” to save the settings.
SR properties

Now you can see, a new system restore point will be made automatically according to your desired schedule and intervals. If you want to change the frequency, you can just modify this task in Task Scheduler

How to System Restore Windows 7 from Boot to Resolve your PC?

In case your computer gets corrupted or something else goes wrong, you can use system restore points to restore the system in Safe Mode in the previous better state. When you cannot boot into Windows 7, you can also go to the Safe Mode to utilize restore system.

  • In your computer startup (before showing the Windows logo), Click the F8 key again and again.
  • Then you will see Advanced Boot Options, choose Safe Mode with Command Prompt.
advanced boot options
  • Write:”rstrui.exe” and click Enter.
  • Then you can select one of the accessible restore points to system restore Windows 7 in Safe Mode.

In case you are unable to boot into Safe Mode, you can also use a system repair disc to ingress System Restore to restore your PC.

Issues System Restore Points cannot fix:

As we have explained above, system restore will restore registry settings, drivers, system files, installed software. There are some programs like antivirus tool that will not work as they should work after the restoration. Windows will make a list of all the affected programs. Before performing the task of system restore you should always check them.

All the Windows updates that are installed after the restore point will be uninstalled. Your personal files and other important data will remain safe and not be affected, so we can say that system restore points cannot be regarded as data backup.

Keep this thing in your mind that system restore cannot delete, clean virus or malware like WannaCry or Petya, because, they are deeply infected within your operating system. As the restore points are saved on every volume, the system restore will not work if the volume corrupted. Apart from that, you may want a deeper layer of security besides making system restore points in Windows 7.

Image Backup Software to Save your System:

For the sake of protection and save your system from serious troubles likehard drive failure,ransomware infection, filesystem corruption, you should make a full system image backup.

AOMEI Backupper is efficient and well found free backup software which is produced to help you in making yoursystem’s image backup, which you can use it to instantly restore your PC to a previous state in case of emergency.

It also permits you to make extra backups or dissimilar backups to keep your data backup updated without taking unnecessary disk space. It has a clear interface and is so intuition to users that even a newbie of the computer won’t feel any issue during the operation. You can follow these steps to create a system restore point in Windows 7:

  • You can Free download, install and run AOMEI Backupper. Then in the interface, press “System backup”.
system backup
  • After doing that choose the backup destination in the “Step 2” to save the image file, and then press “Start Backup” to start the operation.
backup

Note: In case you want to automatically backup: You can also customize the backup period like backup as daily, weekly, monthly. After this, press “Schedule Off” at the bottom of the backup interface. In Schedule Backup Setting window, three option bars list on top: Daily; Weekly; Monthly.

schedule backup settings

Restoration of System from a Backup with AOMEI Backupper:

As you will get to know how to create a restore point windows 7restorebackup, there are 4 methods through which you can restore your system back with AOMEI Backupper. You can restore the backup to a new hard drive or SSD, or even restore to dissimilar hardware.

  • Reinstate within running Windows. In case your PC is bootable but not working properly, you can open AOMEI Backupper and choose backup file under Restore tab to perform the restore.
  • After that, you will reinstate from the Windows recovery environment. You can also amalgamate AOMEI Backupper to Windows recovery environment. Then press Windows recovery environment to select AOMEI Backupper and then restore the backup from Windows repair disk or installation disc.
  • Reinstate through bootable CD or USB drive. If your system fails to boot, you can do it from the old created bootable media to boot your PC to perform the process of restoration. You can create the bootable disk from another working computer in case you did not make the boot media earlier.
  • Through AOMEI PXE Tool you can use feature under Utilities from another working system to boot your PC that is having boot issues.

Conclusion:

Making a system restore point in Windows 7 is the best choice of selection in the event of installed programs, drivers, system files, settings go wrong. In case of more serious system issues, it is recommended to make full system backup with AOMEI Backupper. By following above ways you can easily get to know how to create a restore point windows 7.

There are many users who have complained about the blue screen of death error SYSTEM_SERVICE_EXCEPTION(dxgkrnl.sys)DirectX Graphics Kernel is the abbreviation of the code dxgkrnl.sys has told users that this code is the reason for their trouble. No need to be worried about it because here we have a few solutions to resolve your issue.

system service exception

Method 1: Always Update Windows 10

It is important for users to update their Windows, always because in case you don’t have updated Windows then you would probably face trouble like this.

  • Tap the Windows logo key and X together on your keyboard and press settings. 
settings
  • Now Press Update & security.
update and security
  • Then tap the Check for updates button and Windows will find for the required patches for your system.
check for updates
  • At the end Install updates in case of their accessibility and then you should just reboot your PC to see the alteration of effects.

Method 2: Updating Graphics Card Driver

Users should update their graphics card driver in case they see something is wrong that is interconnected with their video card, as it can be recognized by the code.

Users can find the required manufacturer’s display card driver for their system from the official webpage. In can you don’t have time, stamina and enough skills to download drivers on your own; you can also do it via automatic processing with the help of Driver updater, as it is efficient to install right drivers for your PC without causing any trouble for you.

To update drivers via an automatic process, you can do it with either the FREE or the Pro version of different windows driver updater. With the Pro version, you can do it within just 2 taps and can also get full support and 30-day money back guarantee.  

  • Installation of Driver Updater
  • Press the Scan Now button after Run Driver Updater. Windows driver updater will scan your PC and find all drivers that are problematic.
  • Now tap the Update button next to the flagged graphics card device to download the right version of this driver by automatic processing. Users can also do this with the FREE version.

You can also PressUpdate All to download the well-suited version of all misplaced and old drivers on your system automatically. All this process needs the Pro version and you’ll be ready to upgrade the time you tap onUpdate All.

Method 3: Check for Possible Hardware Failure

A problematic motherboard or something wrong with RAM can also be the cause of the trouble. In the case the above procedures don’t fix your problem; you have to consult some computer expert. But before taking this step user can also try it if they have NVIDIA graphics card. They can switch off NVIDIA Surround. Below is the way to do it:

You can tap combination keys Ctrl + Alt + S or Ctrl + Alt + R to turn it off on your keyboard.

Sometimes the above methods don’t work, so in this case, you have to boot with some other monitor and you will see that it would be switched off through automatic processing.

Method 4: Disabling SLI

It is very important for gamers that they disable SLI in the systems to fix this issue.

  • To do it just go to the Nvidia Control Panel. Here you can gain access to it by double-clicking its icon.
  • Then go to 3D Settings and press on the option of Set SLI Configuration.
  • Here let it sure that you Do Not Use SLI Technology is chosen.
  • In the end, tap Apply to save changes.

Method 5: Turn off Nvidia Surround

Not turning off this feature will come up as an issue named dxgkrnl.sys, so it is better to fix this problem by turning it off. At times it has been said that users are unable to turn it off easily so by using CTRL+ALT+S or CTRL+ALT+R they can make it work. You can also unplug other monitors and boot with only one monitor plugged it to solve this issue if the above short keys don’t work, as it turns off this feature via automatic processing.

Method 6: Changing graphics memory size in BIOS

  • You can do it by starting your PC again and tapping Del, F2 or F10 on your keyboard however your computer boots. There is this possibility that the key that you are supposed to tap might be unlike on your computer, so look for Press (key) so you could enter Setup message however your PC is booting, and tap the indicated key.
  • Then search the option of Advanced, Advanced Chipset or Advanced Features menu.
  • At the end Locate Graphics Settings or Video Settings and alter the memory size to 128MB or greater than it.

Method 7: Check for hardware malfunctions

At times this error is caused by a defective RAM module or motherboard, so in case your PC is under guarantee, you should go to visit the repair shop so it can be tested for hardware failures.

Method 8: Run the SFC scan

To solve this issue user should probably go for the SFC scan. You can do it by following the below steps:

  • As initial step go to Search, write cmd, and initiate the Command Prompt as Administrator before writing the following instruction and click Enter: sfc/scannow.
administrator command prompt
  • Wait for some time till the course ends and start your PC once again.
  • As the initial step just go to the Settings app and move to the option of Updates & Security > Troubleshoot.
  • Here just tap Blue Screen, and go to Run the troubleshooter.
troubleshoot
  • Then go for the commands and allow the wizard to end the procedure before starting your PC again.

Method 10: Run DISM

  • To do it you are supposed to write cmd in the Windows search bar, right-click on the Command Prompt and initiate it as an administrator.
  • Then in the command line you can copy paste the following lines one after another and click Enter:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

restore health

We hope that by following the above steps carefully users would be able to solve this issue successfully.

Conclusion:

By using the above-mentioned methods users can resolvedxgkrnl.sys Blue Screen that is mostly caused by an error of the code. We hope that you can easily able to fix your system’s trouble with these suggested methods.

It is a question that is answerable and should be focused that how to startup windows 10 in safe mode, as Windows 10 is the most debatable update nowadays. Users have complained about numerous issues that happen after, before and during the processing of updating like booting into the safe mode. As everyone knows, that the old ways don’t work now as the world is moving towards better technological versions.

Users used to enter windows 10 safe mode by clicking SHIFT+F8. Windows 10, doesn’t work that way. It has changed all the old ways through which you can use it into the safe mode and made them easier for its users to deal. The new version of windows has a lot of issues to start with and has not been able to prove its solution yet. With the help of its better and advanced update and exceptional software and system, it is popular everywhere. The issues are happening because the process became faster and advanced more than the old days, still, it doesn’t mean that Windows 10 has no Safe Mode.

Just look and see all the methods through which you can get into Safe Mode in Windows 10:

Windows 10 Startup Safe Mode:  

The time when users run Safe Mode in Windows 10, the operating system loads a minimal user interface, with only the necessary services and drivers needed for it to work. It looks like the below picture:

safe mode

Method 1: Utilize the System Configuration Tool (msconfig.exe)

It is one of the simplest methods to enter into Safe Mode in Windows 10 through the System Configuration tool. There are users who know this tool by its practicable name: msconfig.exe.

It is the quickest way to set up System Configuration in Windows 10 to utilize the Run Window. At the same time click on the Windows + R keys on your keyboard. After that type msconfig in the Open text field, and click Enter.

msconfig

Another way of starting the System Configuration Tool is that users can utilize Cortana. In the search bar from your taskbar, add the words “system configuration.” Then press on the System Configuration shortcut.

system configuration

After that in the System Configuration window, press the Boot tab. Then in the Boot Options section, choose the “Safe boot” option. At the end press on OK.

system configuration 2

In Windows 10 you need to reset your system for the new setting to take effect. In case you still have issues, you can choose to “Exit without restart.” If not, then you can restart now, and your device will work into Safe Mode automatically

system configuration 3

After following above steps when you reset Windows 10, it goes into Safe Mode, here the first thing you’ll see is that Microsoft’s own Edge web browser doesn’t work. The best thing is that you can still make it work through the old Internet Explorer.

Method 2: Use the “Shift + Restart” Combination

Users can try another way of entering into Safe Mode in Windows 10 that is to utilize the Shift + Restart combination. After that, you can Open the Start menu and press on the Power button.

windows 10

When you are keeping the Shift key tap on Restart.

restart

Note: It is also recommended that users can use the Shift + Restart combination from the Sign In screen: press Power, tap and then they can hold Shift and press Restart.

restart 2

Then windows 10 resets and will ask you to choose an option. Select Troubleshoot.

troubleshoot

After following the above steps on the Troubleshoot screen, choose Advanced options.

advanced options

On the Advanced options screen you will select Startup Settings.

UEFI firmware settings

Now you can reboot your device to change advanced boot options, that permits you to Safe Mode. Tap Restart.

startup settings

As Windows 10 resets, you can select which boot options you need to be enabled. To enter into Safe Mode, you have three different options.

To authorize Safe Mode to tap the 4 or F4 key on your system’s keyboard, to enable “Safe Mode with Networking,” tap 5 or F5, and to enable “Safe Mode with Command Prompt” click 6 or F6.

startup settings 2

Method 3: Use the Settings Application to Access the Recovery Options

• You can get into Safe Mode in Windows 10, except that you can also utilize the Recovery options available from the Settings app. Open Settings (Windows + I) and head to the Update & security section.

• After that on the left side of the Settings window, tap Recovery.

• On the right side of the application, in the Advanced startup section, press on the Restart now button.

• In simple words you must go to “Troubleshoot -> Advanced options -> Startup Settings -> Restart”. Then, tap 4 or F4 on your keyboard to enter in Safe Mode, click 5 or F5 to reset into “Safe Mode with Networking,” or click 6 or F6 to go into “Safe Mode with Command Prompt.”

• On the right side of the application, in the Advanced startup section, press on the Restart now button.

• In simple words you must go to “Troubleshoot -> Advanced options -> Startup Settings -> Restart”. Then, tap 4 or F4 on your keyboard to enter in Safe Mode, click 5 or F5 to reset into “Safe Mode with Networking,” or click 6 or F6 to go into “Safe Mode with Command Prompt.”

Method 4: Boot from a Recovery Drive

Users can use the Recovery Drive application to create a system recovery USB drive in windows 10. When you are done with the USB recovery drive, utilize it to reset your Windows 10 device and, when you’re asked to load its content, you will go for it.

In the first screen, they will ask you to select the layout for your keyboard according to your choice, model and preference. Choose the one you want to use, or if you don’t see it listed, click on See more keyboard layouts” to see different variety of layouts.

keyboard layout

After that, you’ve selected your keyboard layout, on the “Choose an option” screen, choose  Troubleshoot.

troubleshoot 2

In next steps you need to enter into Safe Mode are the same ones we explained in a second way from this guide, which is to follow this path: “Troubleshoot -> Advanced options -> Startup Settings -> Restart.” Then, tap the 4 or the F4 key on your keyboard reset into minimal Safe Mode, click 5 or F5to reset into “Safe Mode with Networking,” or click 6 or F6 to go into “Safe Mode with Command Prompt.”

Method 5: Windows 10 Installation Drive and the Command Prompt

In case users have a Windows 10 installation DVD or USB memory or they want to create one, you can utilize it to reset your broken PC with Windows 10 into Safe Mode. To make a Windows 10 installation drive, follow the steps given below: How to download Windows 10 Creators Update and create your own installation media. After that, you will use it to reset your broken Windows 10 system from it and wait for the installation environment to load. Select the language and keyboard layout you like and press on Next.

windows setup

Then Next, press on the link that says “Repair your computer” on the bottom left corner of the screen of your system.

repair your computer

Press on Troubleshoot.

troubleshoot 3

After following the above instructions On the “Advanced options” screen, press on “Command Prompt (Use the Command Prompt for advanced troubleshooting).”

command prompt

Now you can see Command prompt will load. Inside it, type the command: bcdedit /set {default} safe boot minimal. After doing that tap Enter on your keyboard. Wait a moment, Command Prompt tells you that “The operation [was] finished successfully.”End the Command Prompt and select to proceed on the next screen. As your system resets, your Windows 10 will reset into Safe Mode automatically.

Method 6: Interrupt the Normal Boot Processing of your Windows 10 PC

In case Windows 10 doesn’t reset in a proper way after three times, the fourth time it enters by default in an Automatic Repair mode. By utilizing this mode, you can reset into Safe Mode. If you want to trigger the Automatic Repair mode, you have to interfere the usual processing of resetting three times consecutively: use the reboot on your Windows 10 PC to stop it during boot, as it finishes loading Windows 10. In case you utilize the power button, you might have to remain it clicked at least 4 seconds to switch it off. After that, as your Windows 10 PC enters the Automatic Repair mode, you can see is a screen that tells that the operating system is “Preparing Automatic Repair.”

preparing automatic repair

Then just wait for Windows 10 to try to create an automatic diagnosis of your system.

diagnosing your pc

After that on the “Automatic Repair” screen, tap the “Advanced options” button.

automatic repair

Then On the next screen you will select Troubleshoot.

troubleshoot 4

Now the steps you’ll have to follow are the same as those we’ve shown in the second method from this guide above. Now you will follow the path “Troubleshoot -> Advanced options -> Startup Settings -> Restart.” Then, tap the 4 or the F4 key on your keyboard reset into minimal Safe Mode, click 5 or F5 to reset into “Safe Mode with Networking,” or tap 6 or F6 to go into “Safe Mode with Command Prompt.”

Method 7: F8 or Shift + F8 (doesn’t work while using UEFI BIOS & SSDs)

Sometimes in Windows 7, you were able to tap F8 just before Windows got loaded, as you open the Advanced Boot Options window, where you select to start Windows 7 in Safe Mode.

Some websites recommend you to tap Shift+F8, as Windows 10 starts loading so that you would be able to make it launch the recovery mode, from where you can reset into Safe Mode. Most of the times, Shift+F8 and F8 don’t work, even though they are correct instructions, given by Windows 10. In case you have a modern system with a fast SSD drive and UEFI BIOS there’s no other method though you can interrupt the reset procedure with your keypresses. On older systems with a classic BIOS and no SSD drive, clicking these keys can be helpful.

Conclusion: Windows 10 is an advanced operating system with a fast and better boot process. Windows 10 Startup Safe Mode is the main issue but by following the given steps carefully and you can easily start it in safe mode on Windows 10.

As users know that Microsoft has introduced many versions of Windows and Windows 10 is included as of the most popular inventions. The release of Windows 10 became far more successful when Microsoft declared that Windows 10 will be a free upgrade to those who are utilizing real versions of Windows 7, 8 and 8.1.

Like all the older Windows releases, this upgrade also came along numerous issues which provoked many people to go backor not go for this new upgrade because Windows 10 updates has a dissimilar system and it also tackles thing differently.

In the start, users were unable to stop Windows 10 from installing updates and there were some more issues in the processing of Windows Update which further causes trouble. Another issue was that sometimes Windows Update totally stops responding on Windows 10, as it is a very big problem because some of the updates are vital for the security of the system and because of this trouble Windows are unable to receive any of the newer updates.

Following are some issues that might happen to Windows 10 and cause trouble:

  • Windows Update Stops Responding after Creators Update:Creators Update is the newest main update for Windows, but users have also complained that Windows Update have stopped responding on their system the time they download Creators Update.
  • Windows Update Service not Running Problem:There are someWindows Updates that are based on particular services so they can work normally. Many users have also complained that Windows Update service isn’t running on their system.
  • Windows Update not Responding, Running and Progressing:This is another often happening issue with Windows Update. Users have complained that Windows Update isn’t workingor has anyprogress.
  • Windows Update not working via Proxy:Proxy is a solid way through which you can save your online privacy. There are many users who have said that they are having issues while using proxy.
  • Windows Update won’t install, Update and Download:Users have been alsocomplained about many issues regarding Windows Update. They said that Windows Update have stopped giving any newer updates and installations.
  • Windows Update won’t Open, Load, Start Windows 10:Another trouble is to start Windows Update on Windows 10. As users have said that they don’t open on their system.
  • Windows Update not Applicable, Finding updates, Connecting: Sometimes Windows Update is unable to get any updates. Users have reported that Windows Update is unable to connect to the server.
  • Windows Update not enough Space:This problem is caused by lesser capacity. To resolve this problem, users should try to erase unwanted files and check in case that solves their issue.
  • Windows Update taking a lot of Time, Hangs and Stuck:Users have reported that Windows Update takes a lot of time. Sometimes they even stuck and don’t respond. Windows Update Database Corruption:Database corruption can occur and stop you from downloading updates. This isn’t a usual trouble still you should be able to solve it with one of our methods below.
  • Windows Update Broken:Many users have complained that their Windows Update is broken. They even said that they are not even able to utilize Windows Update.

Following are some ways to resolve these issues:

Method 1: Try your hand at utilizing Troubleshooter

Microsoft’s troubleshooter is one of the best methods to fix the issue in case it is not very troublesome. Everybody likes to use it because of its speed and it is safe to utilize it as it doesn’t cause any harm to your system.

troubleshooting

Here you have to install the Windows Update Diagnostic from the Windows webpage and start it. It will work on its own and will resolve all issues in case it identifies.

windows update

Whether it solves your issue or not but it can find and give you all with the helpful information relevant to the error.

windows update 2

Method 2: Utilize System Restore to go Back and Remove Problematic Update

System Restore might probably help in case Windows Update doesn’t work. It takes your PC back into the time when it was working normally. It can also resolve your problem but before anything else you have to know when the trouble began the reason behind.

Follow these below steps:

  • As first step just Open Start Menufrom the Taskbar at the bottom of the screen.
  • Then tap to open the Settings right above the Power button.
settings
  • Now press on the tab of Update & Security.
update and security
  • After the completion of above steps in this new window, choose Update History and find the last successful downloaded update on your windows.
update history

After pointing out the origin of the problem now you need to restore your computer right before that event so that it works fine as before that update. Following should be followed to restore your windows.

  • Here you press that option and you will now see a list of downloaded updates on your PC.
  • You will also see optionUninstall updates at the top. Tap it.
uninstall updates
  • The time you tapUninstall updates, a new window will open which will displays the new updates that are downloaded on the system.
  • Now you can select to uninstall any of these updates but continue with after confirmation as deleting a complicated update will cause harm to your system.
currently installed updates
  • At the end of restore, you will see that your system will work normally.

Method 3: Scanning your System for Malware

Windows Update also gives updates that exclude the impacts of this malware. There are various malware target Windows Update to prevent it from working normally. Except that this malware also has impacts on other vital Windows services like Windows Update, Antivirus Program, and System Restore.

windows defender

In case Windows Update is not responding you will have to be confident whether your system is fine and does not have any type of troubling material like bugs or virus.

Users can do it by scanning their system with the help of a security program that they have or in case they just utilizeWindows Defender, then go for it and scan it while utilizing Windows Defender. All you need to do it to make sure your security programs are updated in order to keep your system secure.

Methods 4: Download New Version of Windows

In case of nothing all the above methods don’t solve your issue then it is better to download the new version of Windows while utilizing Microsoft Windows 10 Install Drive. For selecting this option it is significant for you to make a backup of your data on an external drive because there are possibilities that you might probably remove all of your information. Also, the product ID of your windows should be secured or noted at a secure place before downloading your Windows again.

Method 5: Removing all Files from software distribution Directory

In case Windows Update is not working on your system, then you shouldfix it by removing files from SoftwareDistribution directory. At times files in this directory become problematic and that can be the reason of trouble.

To solve this problem, you have to remove these files by the following way:

  • Tap Windows Key + R and enter services.msc. Then Click Enter or press OK.
services.msc
  • When you see theServiceswindow has opened, just locate Background Intelligent Transfer Serviceand right click it to select Stop from the menu. Same goes for Windows Update service.
windows update service
  • After the completion of above steps disable these services and go to C:WindowsSoftwareDistribution directory.
software distribution
  • Now choose all files in the SoftwareDistribution directory and tap on Delete.
delete
  • Now roll back to Services window and run both Windows Update and Background Intelligent Transfer Services.

Then install updates on your own and see if the trouble is solved yet or not.

In case you’re expert in computers, you can solve this issueby utilizing Command Prompt. This process is a bit more complicated but users also prefer it because of its fast speed.

You can do it by the following ways:

  • Firstly, open Command Prompt as administrator. You can do it by clicking, Windows Key + X to open Win + X menu and selectCommand Prompt (Admin). In case command Promptis unavailable you can also utilize PowerShell (Admin).
  • Now when Command Prompt opens, you need to paste the following lines and run them one after another:
  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver
  • ren C:WindowsSoftwareDistribution SoftwareDistribution.old
  • ren C:WindowsSystem32catroot2 catroot2.old
  • net start wuauserv
  • net start cryptSvc
  • net start bits
  • net start msiserver
  • pause
  • Exit

After running these instructions, the errors with Windows Update should be solved you’re your system will start working back normally.

Method 6: Change your DNS

Windows Update also stops working because of some issues with your DNS, as some users have reported it.  At times your default DNS might have some errors that are stopping you from utilizing Windows Update.

You can resolve it by these following steps:

  • As initial step Right click the network icon in the bottom right corner and selectOpen Network and Sharing Center.
open network and sharing center
  • Now in the left pane, tap on the option of Change adapter settings.
change adapter settings
  • Just locate your network connection, and right click and select Properties from the menu.
network connections
  • Choose Internet Protocol Version 4 (TCP/IPv4)and press on Properties.
ethernet properties
  • Choose use the following DNS server addresses and enter8.8.8.8 as Preferred DNS server and 8.8.4.4 as Alternate DNS server. Then tapOK to save changes.
internet protocol version 4
  • At the end when you have changedyour DNS server the trouble should be solved and Windows Update will probably start working normally once again.

In case of Windows Update is not responding on your system properly, then there are higher possibilities that the trouble might be your Internet connection or file corruption. It can also be a major issue, but hopefully, you can resolve it by utilizing any of the above methods.

Conclusion:

Windows 10 stops updating is a major issue that most often happens now a days. Still there is no need to be worried about because above given methods might probably solve your trouble.

Many users are complaining against blue screen errors especially those who are currently using Windows 7. The reason behind this trouble is ntoskrnl.exe. There is no need to be anxious, as in this article we have some methods to solve your problem.

The kernel of the operating system is Ntoskrnl.exe. Windows can’t perform their duties without them. Issues like that can cause your PC blue screen errors and many other troubling issues.

ntsokrnl.exe

Following are the methods through which users can fix their trouble of ntoskrnl.exe:

Method 1: Updating Device Drivers

Wrong and unsuited drives are one of the significant reasons for your trouble. Keep this thing in your mind that whenever you face this blue screen trouble then there is an urgent need to update old drivers. You can do it by the below given ways:

Updating Drivers on your Own:

By consulting the manufacturer’s webpage, users can find compatible drivers for their system and start the process of installation on their behalf. Just keep it in your mind that you have to find out the latest drivers for your system. 

Updating of Drivers via Automatic Processing:

Users can install drivers via automatic processing with the help of windows driver updater. Sometimes users don’t have much expertise in the field of computers and they are unable to install drivers manually, in this situation they can apply this method. Driver updater will find right drivers for your Windows and install them without causing any harm.

  • As first step users will Downloadany kind of windows driver updater.
  • Run windows driver updaterand tap the Scan Now button. Driver Updater will scan your PC and find all problematic drivers.
  • Next to all flagged devicesTapthe Update button to install the right version of drivers through automatic process. It can also be done with the FREE version.

You can also Tap Update All to automatically install the right version of misplaced and old drivers.  As it needs the Pro version which will come with full support and 30-day money back guarantee. You will upgrade when you press Update All.

need updated drivers

Method 2: Settings of Reset Overclocking

Overclocking drivers is another cause of the trouble. In case you have compatible software to alter the overclock in BIOS, so you should probably utilize it but if you do not have it then just follow the below steps, to remove the CMOS from inside the BIOS menu and reset your BIOS settings back to their factory default mode.

Note: These below steps are for Windows 7 only, as it will vary from Windows to Windows.

  • As the initial step click and hold the power button for a few seconds until your system totally shuts down. 
  • Then Switch on the system. After doing that the time you see first logo pops up on screen then tap F1F2, F10, ESC or Remove for desktops to enter the BIOS.

NOTE: At times users have to tap the combinations like CTRL+ ALT+ ESC or CTRL+ALT+DEL in case they are utilizing old system. These keys vary from system to system, according to the model and version. Users have to select the right key to click on the screen whenever some instructions pop up.

vmware

After the completion of the above steps, users can utilize the arrow key to End and move down to Load Setup Defaults. Here it is the possibility that your PC varies, but you should be capable to see the option Load Setup Default.

load setup defaults
  • Now tap the Enter key and you would be able to see notification like this. Then utilize the arrow key to pick Yes and then click Enter once more.
load setup defaults 2
  • Then Exit Saving Changes should be highlighted just tap and click Enter again to save configuration change.
exit saving changes
  • Now you would be able to see your system starts rebooting.

    As we have explained above that all instruction can vary according to the version and model of your system, so if you are unable to understand the instruction you should just go to the official webpage of the manufacturer for guidance.

Method 3: Perform a Memtest

Ntoskrnl.exe BSOD can also be caused by a corrupt driver that associates it with the memory.You should probably check the safety and compatibility of your system’s memory so you would be able to know which driver is conflicting.
Note:In case of over-clocking shut them down before you are about to check the safety. Now you have to restart your PC to start the test. The time you start the test, you are unable to utilize your PC.

  • Tap the Start button on your keyboard, and write Windows Memory Diagnostic and click Enter
windows memory diagnostic
  • Now press Restart now and check for the issues as it is suggested by experts. You should also be confident about saving your work first, as your PC will reboot without delay.
restart now and check for problems

Now your PC will reboot and the Windows Memory Diagnostic Tool screen will pop up.

windows memory diagnostic tool
  • ALL this process will take some time to end. You would also be able to check the analysis after logging in.

Conclusion:

Sometimes ntoskrnl.exe causes error and your Windows stop responding which is a big issue in case you don’t know how to solve it. From the above methods you can fix your problem easily.